Effect of Production Volume on Prevention Costs, Valuation Costs, and Damaged Products in the Seafood Processing Industry
DOI:
https://doi.org/10.33830/jfba.v3i1.4488.2023Keywords:
Prevention Costs, Appraisal Fee, Damaged Products, Production VolumeAbstract
The purpose of this study was to determine the effect of production volume on prevention costs, the effect of production volume on appraisal costs, the effect of production volume on damaged products, the Effect of prevention costs on damaged products, and the effect of appraisal costs on damaged products. This type of research is quantitative. The type of research data is secondary data for 2019-2020 which consists of reports on production volume, prevention costs, appraisal fees, and damaged products. The analytical method uses the Smart Partial Least Square (SmartPLS) software 3. The results of this study indicate that production volume has a positive and significant effect on prevention costs, production volume has a positive and significant effect on appraisal costs, production volume has a positive and significant effect on damaged products, prevention costs have a negative but not significant effect on damaged products, and appraisal costs have a positive but not significant effect on damaged products. All hypotheses put forward in this study were declared accepted. The implications of the results of this study can be taken into consideration for companies by comparing data on handling costs, appraisal costs, production volume.
References
Ayach, L., Anouar, A., & Bouzziri, M. (2019). Quality cost management in Moroccan industrial companies: Empirical study. Journal of Industrial Engineering and Management, 12(1), 97–114. https://doi.org/10.3926/jiem.2749
Badriah, E. (2016). Pengaruh Biaya Pemeliharaan dan Perbaikan Aktiva Tetap Terhadap Volume Produksi Pada Perusahaan Daerah Air Minum Tirta Anom Kota Banjar. JAWARA : Jurnal Wawasan Dan Riset Akuntansi, 3(2), 64–70. https://doi.org/http://dx.doi.org/10.25157/jwr.v3i2.1380
Chatzipetrou, E., & Moschidis, O. (2016). Quality Costing: A Survey In Greek Supermarkets Using Multiple Correspondence Analysis. International Journal of Quality & Reliability Management, 33(5). https://doi.org/10.1108/IJQRM-01-2014-0004
Chopra, A., & Singh, B. J. (2015). Unleashing A Decisive Approach To Manage Quality Costs Through Behavioural Investigation. Business Process Management Journal, 21(6), 1206–1223. https://doi.org/10.1108/BPMJ-07-2014-0064
Daunoriene, A., & Staniskiene, E. (2016). The Quality Costs Assessment in the Aspect of Value Added Chain. Quality Innovation Prosperity/Kvalita Inovácia Prosperita, 20(2), 119–144. https://doi.org/10.12776/qip.v20i2.746
Dzakiyyah, F., & Ishak, J. F. (2022). Pengaruh Biaya Kualitas dan Biaya Produksi Terhadap Penjualan (Studi Kasus pada PT. XYZ). Prosiding The 13th Industrial Research Workshop and National Seminar, 13(1), 1386–1393. https://doi.org/https://doi.org/10.35313/irwns.v13i01.4296
Ghozali, I., & Latan, H. (2015). Partial Least Squares Konsep Teknik dan Aplikasi Menggunakan program SmartPLS 3.0. Badan Penerbit Undip.
Glogovac, M., & Filipovic, J. (2018). Quality Costs In Practice And An Analysis Of The Factors Affecting Quality Cost Management. Total Quality Management & Business Excellence, 29(13–14), 1521–1544. https://doi.org/10.1080/14783363.2016.1273105
Hadijah, A., Arfan, T., & Zarefar, A. (2019). Pengaruh Biaya Kualitas terhadap Produk Cacat Pada PT . Riau Andalan Pulp and Paper. Jurnal Akuntansi Keuangan Dan Bisnis, 12(2), 57–66. https://jurnal.pcr.ac.id/index.php/jakb/article/view/3367
Hasanuddin, H., Sartika, D., Anas, M., & Hariatih, H. (2021). Pengaruh Biaya Kualitas Terhadap Produk Rusak pada PT. Faninda Jaya Meubel Kabupaten Gorontalo. AkMen JURNAL ILMIAH, 18(3), 267–278. https://doi.org/10.37476/akmen.v18i3.1955
Haug, A., Zachariassen, F., & Liempd, D. Van. (2011). The Costs of Poor Data Quality. Journal of Industrial Engineering and Management, 4(2), 168–193. https://doi.org/http://dx.doi.org/10.3926/jiem.2011.v4n2.p168-193
Hilmi, K., & Cevik, Z. (2013). Measuring and Reporting Cost of Quality in a Turkish Manufacturing Company: A Case Study in Electric Industry. Journal of Economic and Social Studies, 3(2), 87–100. https://doi.org/10.14706/JECOSS11326
Jaaron, A. A. M. (2022). Weaponizing Cost of Quality of Food Manufacturers: Implications for Organizational Performance. Proceedings of the International Conference on Industrial Engineering and Operations Management, Turkey(March 7-10), 9–17. http://ieomsociety.org/istanbul2022/proceedings/
Jawa, B., Amtiran, P. Y., & Ndoen, W. M. (2020). Analisis Titik Impas Volume Produksi Produk Batako Di Ribas Batako Kabupaten Kupang. Journal of Management: Small and Medium Enterprises (SMEs), 12(2), 167–178. https://doi.org/10.35508/jom.v12i2.2690
Juwita, R., & Fajaryanti, N. (2021). Pengaruh Produk Rusak Terhadap Biaya Produksi Pada PT Indofood Sukses Makmur Tbk. Land Journal, 2(2), 58–67. https://doi.org/10.47491/landjournal.v2i2.1346
Kerfai, N., Ghadhab, B. B., & Malouche, D. (2016). Performance Measurement And Quality Costing In Tunisian Manufacturing Companies. The TQM Journal, 28(4), 588–596. https://doi.org/10.1108/TQM-10-2013-0119
Kusuma, I. C., & Pebrianti, G. (2020). Faktor Yang Mempengaruhi Volume Produksi Pada PT. Yongjin Javasuka Garment Fact 1. Jurnal Akunida, 6(1), 13–23. https://doi.org/10.30997/jakd.v6i1.2813
Listiawati, N. (2020). Analisis Perhitungan Biaya Kualitas Dalam Meningkatkan Kualitas Produk Pada Pabrik Gula Madukismo. Journal of Economic, Public, and Accounting (JEPA), 2(2), 145–157. https://doi.org/10.31605/jepa.v2i2.699
Maesaroh, Furniawan, & Agustiara, T. (2021). Pengaruh Biaya Bahan Baku Terhadap Volume Produksi Pada CV. Shaniqua Marigold Bamboo Di Rangkasbitung. E-Journal Studia Manajemen, 10(1), 1–8. https://ejurnal.latansamashiro.ac.id/index.php/EJSM/article/view/635
Martínez, J. M. B., & Selles, M. E. S. (2015). A Fuzzy Quality Cost Estimation Method. Fuzzy Sets and Systems, 266(1), 157–170. https://doi.org/10.1016/j.fss.2014.12.014
Maulida, I. S., & Tholibin, K. (2021). Pengaruh Kualitas Alat Produksi Terhadap Volume Produksi Industri Tenun Sarung Di Lamongan. Jurnal Ilmiah Administrasi Bisnis Dan Inovasi, 5(1), 1–13. https://doi.org/10.25139/jiabi.v5i1.3192
Paramita, K., Wahyudi, W., & Fadila, A. (2020). Determinan Perilaku Pengelolaan Keuangan pada Pelaku Industri Kecil Menengah. Studi Akuntansi Dan Keuangan Indonesia, 3(2), 213–232. https://doi.org/10.21632/saki.3.2.213-232
Pires, A. R., Novas, J., Saraiva, M., & Coelho, A. (2017). How Companies Use The Information About Quality-Related Costs. Total Quality Management & Business Excellence, 28(5–6), 501–521. https://doi.org/10.1080/14783363.2015.1099427
Purwoko, B., Hadi, M. A., Gamal, A., & Prihartanti, W. (2022). The Effect of Production Costs and Sales Volumes on Profits of Registered Food and Beverage Sub-Sector Manufacturing Companies on the Indonesia Stock Exchange for the 2018-2022 Period. Enrichment: Journal of Management, 12(3), 2459–2468. https://www.enrichment.iocspublisher.org/index.php/enrichment/article/view/657
Sadkowski, W. (2019). Models of Quality Costs Calculation and Their Classification. Organization & Management Scientific Quarterly, 46(2), 117–129. https://doi.org/http://dx.doi.org/10.29119/1899-6116.2019.46.9
Safitri, M. S., Anwar, C., & Muliasari, I. (2021). Analisis Pengaruh Biaya Kualitas Terhadap Produk Cacat (Studi Kasus Pada PT. XYZ Aspal Tahun 2018-2020). Jurnal Akuntansi, Perpajakan Dan Auditing, 2(3), 695–709. http://pub.unj.ac.id/index.php/japa/article/view/598
Safuan. (2017). Pengaruh Peningkatan Volume Produksi Dan Peningkatan Biaya Pemeliharaan Terhadap Pendapatan. Jurnal Inspirasi Bisnis Dan Manajemen, 1(2), 113–122. https://doi.org/10.33603/jibm.v1i2.667
Sulistiyowati, W., Suef, M., & Singgih, M. L. (2022). Cost of Quality: Literature Review Based on Meta-Analysis. Proceedings of the International Conference on Industrial Engineering and Operations Management, Turkey(March 7-10), 4984–4995. http://ieomsociety.org/istanbul2022/proceedings/
Trisnadewi, N. K. A. (2022). Pengaruh Efesiensi Biaya Bahan Baku dan Biaya Tenaga Kerja Terhadap Volume Produksi Pada CV. Jati Jaya Singaraja. Jurnal Artha Satya Dharma, 14(2), 67–72. https://doi.org/10.55822/asd.v14i2.229
Ulfah, B. A. T., & Hastuti. (2018). Pengaruh Biaya Kualitas Dalam Upaya Mengendalikan Produk Rusak di PD. Putra Setra. Jurnal Riset Akuntansi, X(2), 35–44. https://doi.org/10.34010/jra.v10i2.1196
Wahyono, H., & Susanto, A. B. (2017). The Analysis Of Quality Cost On Level Of Product Damage. International Journal of Scientific & Technology Research, 6(11), 118–121. https://www.ijstr.org/paper-references.php?ref=IJSTR-1117-18215
Wulandari, M., Abror, A., & Inggita, M. (2016). The Effect Of Production Cost To Net Profit; A Case Study Of PT. Indorama Synthetics Tbk. Emerging Markets: Business and Management Studies Journal, 3(2), 54–64. https://doi.org/10.33555/ijembm.v4i1.61
Yudiana, A. P., & Lastanti, H. S. (2017). Analisis Pengaruh Dimensi Fraud Diamond Terhadap Perilaku Kecurangan Akademik Mahasiswa Fakultas Ekonomi (Studi Empiris Mahasiswa Fakultas Ekonomi dan Bisnis Universitas Trisakti). Jurnal Akuntansi Trisakti, 4(1), 1–21. https://doi.org/10.25105/jat.v4i1.4965
Yuniastuti, R. M. (2020). Pengaruh Biaya Kualitas Terhadap Minimalisasi Produk Rusak pada Produk Home Industri Pembuatan Kue Donat. GEMA : Jurnal Gentiaras Manajemen Dan Akuntansi, 12(1), 68–74. https://doi.org/10.47768/gema.v12i1.206
Yuniastuti, R. M. (2021). Biaya Kualitas Terhadap Minimalisasi Produk Rusak Pada Produk Home Industri Pembuatan Peyek Kacang. GEMA : Jurnal Gentiaras Manajemen Dan Akuntansi, 13(1), 13–21. https://doi.org/10.47768/gema.v13i1.223
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Ardiansyah, Barus Umarella
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.