PENERAPAN TAGUCHI DALAM OPTIMASI PARAMETER UNTUK PERBAIKAN PRODUK FACIAL WASH
Keywords: facial wash tea tree oil, nominal-is-best, Taguchi
Abstract
PT X is a company engaged in the cosmetic sector. The product with the biggest defect is the green tea tree oil facial wash. This study aims to reduce the number of defects by determining the optimal level setting on the product. The Taguchi method is one of the methods in the experimental design that can be used to control product quality from noise by minimizing variations. This research method uses Taguchi because this method combines experimental results through optimal factors and factor levels and at the same time reduces the number of experiments so as to save time and costs. The experimental factors are water, Nacl, cocamide DEA, citrid acid, mixing speed, mixing time and mixing temperature. The results of this study found that the dominant type of defect in the green tea tree oil facial wash products was the product with low viscosity. In this case, we used a nominal-is-best quality characteristic with a target of 37500 cPs. We found that the optimal setting for green tea tree oil facial wash products were 64.3% of water, 2% of cocamide DEA, 0.3% citric acid and 60 minutes for the mixing period.
Downloads
References
Arina, F. (2015). Perancangan Parameter Dengan Pendekatan Taguchi Untuk Data Diskrit. Jurnal BIAStatistics, 9(1), 1–7.
Chou, S., & Chen, J. C. (2017). Taguchi-Based Six Sigma Approach to Optimize Surface Roughness for Milling Processes. 11(10), 1653–1658.
Halimah, P., & Ekawati, Y. (2020). Penerapan Metode Taguchi untuk Meningkatkan Kualitas Bata Ringan pada UD. XY Malang. JIEMS (Journal of Industrial Engineering and Management Systems), 13(1), 13–26. https://doi.org/10.30813/jiems.v13i1.1694
Hartono, M. (2012). Meningkatkan Mutu Produk Plastik Dengan Metode Taguchi. Jurnal Teknik Industri, 13(1), 93. https://doi.org/10.22219/jtiumm.vol13.no1.93-100
Hernadewita, H., Rochmad, I., Hendra, H., Hermiyetti, H., & Yuliani, E. N. S. (2019). An analysis of implementation of Taguchi method to improve production of pulp on hydrapulper milling. International Journal of Production Management and Engineering, 7(2), 125–131. https://doi.org/10.4995/ijpme.2019.10163
Krishnaiah, K., & Shahabudeen, P. (2012). Applied Design of Experiments and Taguchi Methods. PHI Learning Private Limited.
Montgomery, D. C. (2013). Introduction to Statistical Quality Control (7th ed.). John Wiley and Sons, Inc.
Montgomery, D. C. A. S. U. (2013). Design and Analysis of Experiments (8th ed.). John Wiley & Sons, Inc.
Prawira-Atmaja, M. I., & Rohdiana, D. (2018). DIVERSIFIKASI PRODUK BERBASIS TEH PADA INDUSTRI PANGAN, FARMASI, DAN KOSMETIK Diversification of Tea Based Products in the Food, Pharmaceutical and Cosmetic Industry. Perspektif, 17(2), 150–165. https://doi.org/10.21082/psp.v17n2.2018.150-165
Rachman, F. R., Setiawan, T. A., Karuniawan, B. W., & Maya, R. A. (2019). Penerapan Metode Taguchi Dalam Optimasi Parameter Pada Proses Electrical Discharge Machining (EDM). J Statistika: Jurnal Ilmiah Teori Dan Aplikasi Statistika, 12(1), 7–12. https://doi.org/10.36456/jstat.vol12.no1.a1991
Rushing, H., Karl, A., & Wisnowski, J. (2013). Design and analysis of experiments by Douglas Montgomery: A supplement for using JMP. SAS Institute Inc. https://doi.org/10.2307/2983009
Soebagio, T. T., Hartini, Y. S., & Mursyanti, E. (2020). Aktivitas Antibakteri Sediaan Sabun Wajah Cair Ekstrak Herba Pegagan (Centella asiatica (L.) Urban) terhadap Pertumbuhan Staphylococcus aureus dan Propionibacterium acnes. Biota : Jurnal Ilmiah Ilmu-Ilmu Hayati, 5(2), 69–80. https://doi.org/10.24002/biota.v5i2.2698
Sulistyawan, E. (2015). Analisis Optimasi Ketelitian Dimensi, Kekasaran Permukaan dan Laju Elekroda pada Proses Electric Disvharge Machining dengan metode taguchi Multi Respon. Statistika, 7, 1–14.
Telaumbanua, A., Siregar, K., & Sinaga, T. S. (2013). Analisis Pengendalian Kualitas Dengan Pendekatan Metode Taguchi Pada Pt Asahan Crumb Rubber. Jurnal Teknik Industri FT USU, 3(5), 1–7.
Titu, A. M., Sandu, A. V., Pop, A. B., Titu, S., & Ciungu, T. C. (2018). The Taguchi Method Application to Improve the Quality of a Sustainable Process. IOP Conference Series: Materials Science and Engineering, 374(1). https://doi.org/10.1088/1757-899X/374/1/012054
Trenggonowati, D. L., Ulfah, M., Arina, F., & Wardhani, A. M. (2020). Pengendalian kualitas continuous tandem cold mill (CTCM) menggunakan metode Taguchi pada divisi cold rolling mill di PT. XYZ. Teknika: Jurnal Sains Dan Teknologi, 16(2), 293. https://doi.org/10.36055/tjst.v16i2.9242
Williams, K. W., Bellows, B., Dees, D., Engler, D., Lindner, R., & King, J. J. (2007). SN Ratios for Continuous Variables. In Taguchi’s Quality Engineering Handbook. https://doi.org/10.1002/9780470258354.ch12