PEMANFAATAN IDEF0 UNTUK ANALISIS KINERJA SISTEM MANUFAKTUR (STUDI KASUS: THE ORDER HANDLING MANUFACTURING SYSTEMS)
Keywords: ICOM, IDEF0, manufacturing system, OHMS, performance
Abstract
The IDEF0 (Integration Definition Language 0) developed by Douglas T.Ross and SoftTech.Inc is a procedure for modeling functionality as part of the Air Force programmed on computer-aided-manufacturing which based on SADT (Structured Analisys and Design Technique). Wang and Smith (1988) suggested that IDEF0 could be combined with SSM. IDEF0 is used to analysis manufacture systems, in this case OHMS. Data from research (Budiarto, 2005) on Division of General Engineering at PT.PAL use OHMS further analyzed in this study. Data analysis shows that IDEF0 can be used to mapping activity system, both at the global as well as detail views, and performance indicators for each detail activities can be developed trough IDEF0. In addition IDEF0 can be used as a tool in providing recommendation of performance improvement of manufacturing systems.
Downloads
References
Andy, N., Mike, B., & Mike, K. (2000). Performance measurement system design: Developing and testing process-based approach. International Journal of Operation & Production Management. London, Vol.20 (10), pp. 1119-1145. MCB University Press.
Bourne, M. & Mills, J. (2000). Designing, implementing and updating performance measurement system. International Journal of Operation & Production Management, 20 (7), hal. 754-771. MCB London: University Press.
Budiarto, S. & Suparno. (2001). Simulasi berbasis komputer untuk analisis sistem manufaktur. Studi kasus: The ordering-handling-manufakturing System (OHMS). Proosiding Seminar Nasional INFOKOM. Surabaya: Institut Teknologi Sepuluh Nopember Press.
Budiarto, S. (2005). Peningkatan kinerja OHMS (Order Handling Manufacturing System) melalui Soft Systems Methodology (SSM). Studi kasus: Divisi General Engineering, PT.PAL Indonesia, Surabaya. Tesis Pascasarjana Jurusan Teknik Industri FTI-ITS.
Goyal S.K, Kapil, M., Rambabu, K., & Deshmukh, S.G. (1995) Simulation for analysis of scheduling rules for a fleksible manufacturing system. International Jurnal Integrated Manufacturing System, 6 (5), hal. 21-26
Hill, T. & Robert, S. (1987). A prototype knowledge-base simulation support system simulation. London: Chapman & Hall.
Kuwaiti, M.E. & Kay (2000). The role of performance measurement in business process reengineering. International Journal of Operations & Production Management, Vol.20 (12), pp. 1411-1426. London: MCB University Press.
Ming, W. & Smith, G.W.(1998). Modelling CIM System; Part I: Methodologies. Chichester: Journal of Manufacturing System, Vol.1 (1) pp. 13-187.
Suparno. (1999). Peranan permodelan simulasi dalam sistem manufaktur. Seminar dan Lokakarya Tingkat Nasional: Aplikasi dan pengembangan simulasi computer untuk mendukung pengambilan keputusan di bidang industri manufaktur dan jasa. Surabaya: Jurusan Teknik Industri FTI-ITS.
Tranfield, D. & Fari, A. (1995). Performance measurement: Relating facilities to business indicators. International Journal of Facilities, Vol.13 (3), pp. 6-14. London: MCB University Press.
Watts, C. & Hahn, C. (1994). Monitoring the Performance of Reorder Point Systems: A Control Chart Approach. International Journal of Operation & Production Management, London, Vol.14 (2), pp. 51-61. MCB University Press.
Wu, B. (1992). Manufacturing system design and analysis. London: Chapman & Hall.